Shopping on line can be easy, simple and save you lots of money. It can also take a lot of your time, frustrate you, and result in unwanted purchases. Now the same can be said for regular high street shopping, but with the vast opportunity presented by the Internet it will pay you to spend a few minutes reading this and understanding how to better optimize your Metrication shopping experience:

1. Compare - without doubt the biggest advantage that the Metrication offers shoppers today is the ability to compare thousands of Metrication at a time. This is a great thing, but not necessarily all the time! Too much can be daunting at times so take advantage of the great comparison sites and where possible let them do the hard work for you.

2. Research - if it has been said it will be on the internet. Ignorance is no longer a justifiable reason for buying the wrong thing. Take the time to research in detail everything that you could possible want to know about

3. Testimonials - don't know anybody that has bought a Metrication? Wrong! If the Metrication is good the internet will let you know. Use the Internet as a friend and get testimonials before you buy.

4. Questions - Got a question about Metrication then search the Forums, FAQ's, Blogs etc. Don't be afraid to ask .....

5. Reputation - Never heard of the company selling Metrication? Don't worry, no reason why you should know every company in the world, but you know someone that does! Use the internet to find out what people are saying about Metrication and build up a picture of their reputation for sales, returns, customer service, delivery etc.

6. Returns - still worried that even after all of the above your Metrication wont be what you want? Check out the returns policy. There is so much competition now that someone, somewhere is bound to offer the terms that you are comfortable with.

7. Feedback - happy with your Metrication then let people know, after all you are depending on others people input in your buying decision, so why not give a little back.

8. Security - check for the yellow padlock on the Metrication site before you buy, and the s after http:/ /i.e. https:// = a secure site

9. Contact - got a question about Metrication, or want to leave a comment then check out the sites contact page. Reputable companies have them and respond.

10. Payment - ready to pay for your Metrication, then use your credit card or PayPal! Be aware of companies that don't accept them, there may be genuine reasons but given the huge amount of choice you have when buying online there is no reason at all not to buy via credit card or PayPal.

in a U.S. car, showing the speed of the vehicle in miles per hour (outer) and Kilometres per hour (inner)Metrication (or metrification) refers to the introduction of the Metric system as the international standard for physical measurements—a long-term series of independent and systematic conversions from the various separate localism systems of historical weights and measures. Metrication began in France in the 1790s and spread during the following two centuries to encompass all, but three, countries with 95% of the world's population.

As of 2007, only the United States, Liberia and Myanmar have not adopted the International System of Units as their primary or sole systems of measurement,The World Factbook (2007-01-17). Washington: Central Intelligence Agency. Appendix G. Retrieved 2007-02-04 from https://www.cia.gov/library/publications/the-world-factbook/appendix/appendix-g.html although it is widely used in all countries in science, medicine, and engineering. Note, however, that Myanmar uses metric units on a practical basis in daily life. Antigua is also slowly moving toward implementing the metric system.

The United Kingdom and Saint Lucia are still in the process of official complete conversion , although the metric system is already widely used. Other countries in the former British Empire completed metrication during the second half of the 20th century, the most recent being the Republic of Ireland, which finalised conversion in early 2005.

The United States and the United Kingdom see active opposition to metrication today, the main objections being based in localism, tradition, cultural aesthetics, economic impact, repeating decimal notation when dividing by some numbers (3,6,7,9 etc), or distaste for measures viewed as "foreign". While other countries, like France and Japan, also had significant popular opposition at one time for similar reasons, metrication is now largely accepted.

Before the metric system In medieval Europe local laws on weights and measures were set by trade guilds on a city-by-city basis. For example, the ell or elle was a unit of length commonly used in Europe, but its value varied from 40.2 centimetres in one part of German unit to 70 centimetres in Dutch unit to 94.5 centimetres in English unit#Scottish system. A survey of Switzerland in 1838 revealed that the Foot (unit of length) had 37 different regional variations, the ell had 68, there were 83 different measures for dry grain and 70 for fluids, and 63 different measures for "dead weights".When Isaac Newton wrote Philosophiae Naturalis Principia Mathematica in 1687, he quoted his measurements in Parisian feet so readers could understand the size. Examples of efforts to have local intercity or national standards for measurements, include the Scottish law of 1641, and the British standard Imperial unit system of 1845, which is still commonly used in the UK. At one time Imperial China had successfully standardised units for volume throughout its territory but by 1936 official investigations uncovered 53 dimensions for the chi varying from 200 millimetres to 1250 millimetres; 32 dimensions of the cheng, between 500 millilitres and 8 litres; and 36 different tsin ranging from 300 grams to 2500 grams.Witold Kula, "Measures and Men", Chapter 24:"For all peoples; for all time" However, revolutionary France was to produce the definitive International System of Units which has come to be used by most of the world today.

The desire for a single international system of measurement derives from growing international trade and the need to apply common International standard to goods. For a company to buy a product produced in another country, they need ensure that the product will arrive as described. The medieval ell was abandoned in part because its value could not be standardised. It can be argued that the primary advantage of the International System of Units is simply that it is international, and the pressure on countries to conform to it grew as it became increasingly an international standard. SI is not the only example of international standardisation; several powerful international standardisation organisations exist for various industries, such as the International Organisation for Standardisation, the International Electrotechnical Commission, and the International Telecommunication Union.

International System of Units (SI) See main article: International System of Units Scientists, chiefly in France, had been advocating and discussing a decimal system of measurement based on natural units at least since 1640, but the first official adoption of such a system was after the French Revolution of 1789. The creators of the metric system tried to choose units that were non-arbitrary and practical. The original system started with the metre as the unit of distance, the gram as the unit of mass, and the second as the unit of time. Derived units are made from logical combinations of base units. For example, the speed of an object is defined by the number of metres it moves every second — m/s.

An object that is acceleration has a changing speed, so its m/s value changes per second, thus the unit is m/s². The force exerted on an object can be described by its mass times the resulting acceleration of the object—kg·m/s²—also known as the newton (symbol N). Further base units dealing with electricity, light, and quantities of atoms were added later as these sciences became better understood.

The current version of this system was agreed upon in 1971 and is organised and maintained by the International Bureau of Weights and Measures (abbreviated BIPM, based on the French version of the name). To avoid confusion over the precise value of base units, this organisation also defines a precise recipe on how to recreate the unit, which is decided by the General Conference on Weights and Measures held every four years. While this is the preferred definition for base units, the kilogram is currently defined based on an artifact, an international prototype which is a small object of platinum-iridium dubbed "Le Grand Kilo" maintained by the BIPM.Along with the French Republican Calendar there was an attempt to replace the old (and still currently used) hours, minutes, seconds, and weeks by metric time: a decimal time system with 100 seconds in a minute, 100 minutes in an hour, 10 hours in a day, and 10 days in a week. Since this would have resulted in a day of 100,000 seconds, as opposed to the standard 86,400 seconds, adopting the system would have redefined the second as 0.864 standard seconds. The proposed system was opposed by the Church and dropped on 1 January 1806 in "a political move by Napoleon Bonaparte who decided that it was better to have the Church on his side."O'Connor, J. J. & Robertson, E. F. (2005). "Decimal time and angles".MacTutor History of Mathematics archive. Fife, Scotland: St. Andrews University. Retrieved from http://www-history.mcs.st-andrews.ac.uk/HistTopics/Decimal_time.html on 2006-08-01. The Chinese calendar also had an option for a decimal day system, Ke (unit), up until the 17th century.

Conversion process There are three common routes that nations take in converting from traditional measurement systems to the metric system. The first is a quick, so called "Big-Bang" route which was used by Australia and India in the 1960s and several other developing nations since then. The second route is to phase-in units over time, and progressively outlaw traditional units. This method, favoured by industrialisation nations, is slower and generally less successful. The final route is to redefine traditional units in metric terms. This method has been used successfully where traditional units were ill-defined and had regional variations.

The first route, "Big-Bang", is to simultaneously outlaw the use of history of measurement measurement, metricise, reissue all government publications and laws, and change education systems to metric. India's changeover lasted from 1 April 1960, when metric measurements became legal, to 1 April 1962, when all other systems were banned. The Indian model was extremely successful and was copied over much of the developing world.

The second possibility, and first phase-in route, is to pass a law permitting the use of metric units in parallel with traditional ones, followed by education of metric units, then progressively banning the use of the older measures. This has generally been a slow route to metric. The British Empire permitted the use of metric measures in 1873, but the changeover was not completed in most countries until the 1970s and 1980s when governments took an active role in the now-independent parts of the empire. Japan, too, followed this route and did not complete the changeover for 70 years. In the United Kingdom, the process is still incomplete. By law, loose goods sold with reference to units of quantity have to be weighed and sold using the metric system and, according to current British law, after 31 December 2009 the use of non-metric measures on labelling will be banned. (see Metrication in the United Kingdom for details)

A final possibility is to redefine traditional units in terms of metric values. These redefined "quasi-metric" units often stay in use long after metrication is said to have been completed. China followed this route, and thus while scientists in China know and use the kilogram, common people retain the jin (catty), which now has a value of 500 g. In the Netherlands, 500 g is informally referred to as a pond (Pound (mass)) and 100 g as an ons (ounce), and in Germany and France 500 g is informally referred to respectively as ein Pfund and une livre Confiture de rhubarbe, "1 zeste de citron par livre (500g) de rhubarbe", . In Denmark, the re-defined pund (500 g) is occasionally used, particularly among older people and (older) fruit growers, since these were originally paid according to the number of pounds of fruit produced. In Sweden and Norway a mil (mile) is informally equal to 10 km, and this has continued to be the predominantly used unit in conversation when referring to geographical distances. In the 19th century Switzerland had a non-metric system completely based on metric terms, e. g. 1 Fuss (foot) equal to 0.30 m = 10 Zoll (inches) equal to 0.03 m = 10 Linien (lines) equal to 0.003 m.

It is difficult to judge the degree to which ordinary people change to using metric in their daily lives. In countries that have recently changed, demographics tend to still use an older and more familiar system. Also, local variations abound in what exactly becomes metricated and what does not. In Canada, for example, ovens and cooking temperatures are usually measured in degrees Fahrenheit, and Canadians almost invariably use Fahrenheit for cooking; though this is not necessarily by choice but may instead be due to the overwhelming influence of the neighbouring and largely non-metricated United States. In the United Kingdom, which is still in the process of changing over completely, Fahrenheit is almost never encountered (except when some people talk about hot summer weather) while other metric units are often used in conjunction with older measurements, and road signs use miles rather than kilometres. Such countries could be said to be "semi-metric".

Adoption

The metric system, developed in France around the turn of the 19th century, was quickly taken up by Europe's scientists before spreading to traders and industrialists and finally to the common people. France's neighbour, the Kingdom of the Netherlands (present The Netherlands, Belgium, and Luxembourg), Mexico and Brazil changed in 1820. Spain and its remaining American colonies changed in the 1850s and 1860s. Italy and Germany went metric after their respective unifications in 1861 and 1871, followed shortly by Portugal, Norway, Sweden, Austria-Hungary and Finland. By 1900, 39 countries in Europe and Latin America were using the metric system.

The first Asian nations to convert were Mongolia (1918), Cambodia and Afghanistan (in the 1920s). Japan began its slow conversion process in 1891 when it received a copy of the metre standard from the Institute in France. In 1924, the government decided to replace fully the traditional Japanese unit system within ten years; however, public opposition delayed implementation. The U.S. occupation of the late 1940s briefly caused a de facto conversion to U.S. customary units. Metrication was completed in Japan by 1969, although some of the old units are still in informal use.

India's conversion was far quicker, paradoxically helped by low popular literacy and the fact that there was previously no nationwide standard measurement system—British Imperial units were used by the upper class, while various regional systems were used by the poor. From 1956 to 1961, India both changed to metric units and decimalised its currency.

Hong Kong officially adopted the system under the 1976 Metrication Ordinance. However, many of the wet markets and traditional Chinese medicine shops still use the Chinese units of measurement.

China began conversion in the 1920s, but the process was not completed until Communist times. China also decimalised its native measurement units and redefined them as even amounts of metric units. Thus Chinese units was redefined to equal 500 grams. The Soviet Union changed from Obsolete Russian weights and measures to metric in 1924. and Northern Ireland, where the imperial system still used).Those Arab nations that were colonization by France adopted the system early: Algeria changed in 1840, Tunisia in 1890, and this extended to the other Arab countries after the conquest of the Ottoman Empire in 1918. Jordan, which had been a British League of Nations Mandate, was the last Arab nation to convert, in the 1950s. The German colonies of Rwanda and Burundi and the Belgian Congo (now Democratic Republic of the Congo) were the first sub-Saharan African states to go metric in 1910. French territories in Africa were de facto metric while under French rule and kept the metric weights and measures laws when they became independent in the 1950s and 1960s. The last African states to go metric were the former British colonies of southern and eastern Africa.

Britain and its former colonies (with the notable exception of the United States) began their conversion process in the later part of the 20th century. South Africa began a ten-year process of metrication in 1967 with the creation of Metrication Advisory Board, a Metrication Department and a South African Bureau of Standards. Metrication in Australia began work in 1969 with a publicity campaign involving lecture tours, theatrical advertisements and the free distribution of metric-sized items, including calendars, rulers and A4-sized leaflets. Public opposition was on points of detail only, and the process was declared completed in 1977. Metrication in Canada and New Zealand followed similar plans in the 1970s. Ireland completed a very gradual changeover process on 20 January 2005 with the conversion of road speed limits to km/h. Ireland began metrication in 1970 when schools switched to teaching the metric system only.

In January 2007, NASA announced their plan to use metric units for all operations on the moon for their planned Lunar outpost (NASA), partly in order to improve international cooperation.

Exceptions As of 2007, the metric system dominates all but three countries — Myanmar, Liberia, and the United States — but traditional units are still used in many places and industries. For example, automobile Tire-pressure gauge is measured as Pound-force per square inch in countries such as Brazil and Argentina which are otherwise completely metric. Office space is often rented in traditional units, such as square foot in Hong Kong, tsubo in Japan or pyoung in Korea (use of these units is to be subject to a fine in South Korea beginning July 2007 Use of Traditional Measuring Units to Be Fined — Korea Times, 10-22-2006 20:06). Traditional measurements are still used in some areas, e.g. in plumbing the diameters of pipes are still measured in inches in some countries (though not in the UK where all new pipes are metric). Automotive wheel diameters are still set as whole inch measurements (though tire widths are measured in millimetres) and dots per inch continues to be used in describing graphical resolution in the computer industry. Television and monitor screen diameters and bicycle frame sizes are still commonly cited in inches in many countries, however in Australia, centimetres are often used for CRT televisions, whilst CRT computer monitors and all LCD monitors are measured in inches. The only exception to the metrication process in Ireland was the pint in bars, pubs and clubs; though alcohol sold in any other location is in metric units (usually 333 ml (bottled beer), 500 ml (canned beer), 750 ml (wine) or 1 l (spirit)). In Australia, a pint of beer was redefined to 570ml (see Australian_beer#Beer glasses).



In some countries (like Antigua, see above), the transition is still in progress. The Caribbean island nation of Saint Lucia announced metrication programs in 2005 to be compatible with CARICOM.Caribbean Net News, (17 March 2005). St Lucia moving to metric system. Retrieved 27 August 2006. In the United Kingdom, the metric system is compulsory in most, but not all, industries. In that country, the metric system had been legal for nearly a century before Metrication in the UK began in earnest. The government had been making preparations for the conversion of the Imperial unit since the 1862 Select Committee on Weights and Measures recommended the conversionDepartment of Trade and Industry, United Kingdom (15 July 1862). Report (1862) from the Select Committee on Weights and Measures. and the Weights and Measures Act of 1864 and the Weights and Measures (Metric System) Act of 1896 legalised the metric system. Metric Timeline. UK metric association. Retrieved on 27 August 2006. In 1965, with lobbying from British industries and the prospects of joining the European Community, the government set a 10 year target for full conversion and created the Metrication Board in 1969. Metrication did occur in many areas during this time period, including the re-surveying of Ordnance Survey maps in 1970, decimalisation of the Pound sterling in 1971, and the teaching the metric system in schools. However, no date was set for making the use of the metric system compulsory and the Metrication Board was abolished in 1980 following a change in government.Humble, Jim. Historical perspectives by the last Director of the UK Metrication Board. UK metric association. Retrieved on 27 August 2006. The 1989 European Units of Measurement Directive (89/617/EEC) required all member states to make the metric compulsory, however, the British negotiated certain derogations (delayed switchovers), including miles for road signs, and pints for draught beer, cider, and milk sales.United Kingdom (1995). The Units of Measurement Regulations 1995. Statutory Instrument 1995 No. 1804. ISBN 0-11-053334-8. (see Section 5(2) for exceptions.) Advocacy groups such as the Metric Martyrs, the British Weights and Measures Association, and the Active Resistance to Metrication continue to resist the compulsory use of the metric system, on the grounds that some surveys have shown that a lot of British people do not think in metric termsBritish Weights and Measures Association. Consumer Affairs Retrieved on 27 August 2006. and because physical repackaging into rounded metric numbers could lead to reducing the quantity of goods sold for the same price.British Weights and Measures Association. The Great Metric Rip-Off Retrieved on 27 August 2006. It should, however, be noted that some items have been rounded up during metric changeover, for example spirits were changed from of a Gill (unit) (23.7 ml) to 25 ml and the standard loaf from 14 ounces (396.9 g) to 400 g.

Non-metric countries Liberia, Myanmar (Burma), and the United States are the three countries that have yet to adopt the metric system.The World Factbook. (2006). Washington: Central Intelligence Agency. Appendix G. Retrieved 2006-08-08 from https://www.cia.gov/library/publications/the-world-factbook/appendix/appendix-g.html.U.S. Metric Association. Metric usage and metrication in other countries. Retrieved on 27 August 2006. In the United States its use was made legal as a system of measurement in 1866U.S. Metric Association. Metric Act (Kasson Act) of 1866. Retrieved on 27 August 2006. and the United States was a founding member of the International Bureau of Weights and Measures in 1875.U.S. Metric Association. Metric Convention of 1875. Retrieved on 27 August 2006. The system was officially adopted by the federal government in 1975 for use in the military and government agencies.U.S. Metric Association. Metric Conversion Act of 1975. Retrieved on 27 August 2006. In 1985, the metric system was made the preferred (but predominantly voluntary) system of weights and measures for United States trade and commerce (see Metrication in the United States). It has remained voluntary for federal and state road signage to use metric units, despite attempts in the 1990s to make it a requirement.U.S. Metric Association. National Highway System Designation Act of 1995. Retrieved on 27 August 2006. A 1992 amendment to the Fair Packaging and Labeling Act, which took effect in 1994, required labels on "consumer commodities"U.S. Metric Association. Sec. 1459. Definitions Fair Packaging and Labeling Act. Retrieved on 27 August 2006. to include both SI and U.S. customary units. Likewise, Canada also legally allows for dual labeling of goods provided that the metric unit is listed first and that there is a distinction of whether a liquid measure is a U.S. or a Canadian (Imperial) unit. Most states have passed laws permitting metric-only labels.Metric Methods, The rapid progress of adoption of permissible metric-only labeling at the state level. Retrieved on 27 August 2006. Regardless, the American public and much of the private business and industry use U.S. customary units.Zengerle, Jason (January/February 1999). Waits and Measures. Mother Jones. At least two states, Kentucky and California, have even moved towards demetrication of highway construction projects.Commonwealth of Kentucky (1998). Metric to English Conversion.State of California, Department of Transportation (2004). Metric to U.S. Customary Units (English) Transition.

Air and sea transport Some industries have resisted metrication. Non-metric measures in air and sea transport retain worldwide dominance. In these areas the nautical mile is still widespread. This may be because various historical versions of the nautical mile were originally designed to represent a minute of arc of on the surface of the Earth at certain points (the definition in use today is standardised as 1852 metres exactly). While the metre was also based on the Earth with 100 km equal to an arc of 1 grad (angle), those units of angle have not seen widespread use, though they do appear on some maps.

The prime unit of speed for maritime and air navigation remains the knot (nautical) (nautical mile per hour). But before the 1960s, miles per hour (which bears no relationship to the Earth) was most often used for this purpose, and remained in fairly common use for some purposes in the 1970s and later.

The prime unit of measure for aviation (altitude) is usually estimated based on air pressure values and described in nominal feet rather than nominal metres. However, several countries and and air forces (mostly former countries of the Warsaw Pact) use metres for altitude today. Thus, an individual pilot can sometimes operate with altitudes in metres and sometimes in feet. The policies of the International Civil Aviation Organization (ICAO) relating to measurement are:



Consistent with ICAO policy, aviation has undergone a lot of metrication over the years. For example, the United Kingdom and Ireland metricated runway length and many other measures several decades ago. The United States metricated temperature reports in 1996 and the US military has metricated some reports of visual range. Metrication is also gradually taking place in cargo weights/dimensions and fuel volume/weight.

Accidents and incidents Confusion over units during the process of metrication can sometimes lead to accidents. One of the most famous examples is the Gimli Glider, a Boeing 767 that ran out of fuel in Canada in 1983 due, in large part, to confusion at Air Canada during Canada's metrication.Merran Williams, (July-August 2003), "The 156-tonne GIMLI GLIDER", in Flight Safety Australia, p. 22, 25, available at http://www.casa.gov.au/fsa/2003/jul/22-27.pdf

While not strictly an example of national metrication, the use of two different systems was a contributing factor in the loss of the Mars Climate Orbiter in 1998. NASA specified metric units in the contract. NASA and other organisations worked in metric units but one subcontractor, Lockheed Martin, provided thruster performance data to the team in pound force seconds instead of newton seconds. The spacecraft was intended to orbit Mars (planet) at about 150 km altitude but the incorrect data meant that it descended to about 57 km and probably burned up in the Martian atmosphere.

Opposition Interestingly, considering it was the birthplace of the metric system, France experienced a particularly rough journey to metrication. The traditional French measuring system was chaotic, with size of units differing in each small town, and often even within towns. Lyon had two different values of pound in general use, one of 14 ounces, and another of 15 ounces, the latter only being used for measuring silk. The revolutionary government, which saw the newly conceived metric system (commissioned by the previous king) as a good fit for its ideology of "pure reason", first attempted a quick conversion, legalising metric units in 1795 and, just four years later, banning the use of traditional units. Massive popular opposition led Napoleon, after he came to power, to roll back these reforms. He publicly denounced the previous government for "tormenting people with trifles". It appears that it was decimalisation that disturbed the people most — as, although Napoleon decreed that there should be "such fractions and multiples as were generally used", he redefined the old base units in metric terms. The original metric system was made law again in France in 1837.

Japan also saw popular resistance to its 1920s metrication program, where opponents of the metric system believed that the adoption of a foreign measuring system would have a bad influence on national sentiment, cause dislocations in public life and needless expense to the nation, prove disadvantageous to foreign trade, and hurt the national language and culture. In 1933, the government postponed the date of the first stage of conversion by five years, and the date of the second stage by ten years. The Occupied Japan resulted in a temporary conversion to U.S. customary units. The Post-Occupation Japan required an international standard measurement system and the issue was pursued again in the 1950s and 1960s. The process was not completed until 1969. Traditional units are, however, still used for measurements of sake and the area of land and apartments. Nevertheless, local units had been defined in terms of metric units (e.g., 1 shaku = 10/33 metre) as early as 1891. For the measurement of sake, 10 Japanese cups (180 millilitres each) equal 1 shoh (traditional flask size of 1.8 litre capacity). Rice cookers are typically sold as having capacities such as 5 cups or 10 cups. (Note that the traditional Japanese cup is 180 millilitres while the American cup is 237 millilitres.Conversion for US cup can be found in NIST (1995) Guide to SI Units Appendix B8 )

Overall, few countries have experienced much popular opposition to metrication. Some, such as 19th century European countries, Russia, India and China, converted before most of their populations were literate, so the initial conversion affected few people. For others, such as Ireland, the previous system (ie. imperial) was seen as foreign.

See also

Notes

External links

Websites supporting metrication:

Books supporting metrication:

Websites opposing metrication:

Books opposing metrication:

in a U.S. car, showing the speed of the vehicle in miles per hour (outer) and Kilometres per hour (inner)Metrication (or metrification) refers to the introduction of the Metric system as the international standard for physical measurements—a long-term series of independent and systematic conversions from the various separate localism systems of historical weights and measures. Metrication began in France in the 1790s and spread during the following two centuries to encompass all, but three, countries with 95% of the world's population.

As of 2007, only the United States, Liberia and Myanmar have not adopted the International System of Units as their primary or sole systems of measurement,The World Factbook (2007-01-17). Washington: Central Intelligence Agency. Appendix G. Retrieved 2007-02-04 from https://www.cia.gov/library/publications/the-world-factbook/appendix/appendix-g.html although it is widely used in all countries in science, medicine, and engineering. Note, however, that Myanmar uses metric units on a practical basis in daily life. Antigua is also slowly moving toward implementing the metric system.

The United Kingdom and Saint Lucia are still in the process of official complete conversion , although the metric system is already widely used. Other countries in the former British Empire completed metrication during the second half of the 20th century, the most recent being the Republic of Ireland, which finalised conversion in early 2005.

The United States and the United Kingdom see active opposition to metrication today, the main objections being based in localism, tradition, cultural aesthetics, economic impact, repeating decimal notation when dividing by some numbers (3,6,7,9 etc), or distaste for measures viewed as "foreign". While other countries, like France and Japan, also had significant popular opposition at one time for similar reasons, metrication is now largely accepted.

Before the metric system In medieval Europe local laws on weights and measures were set by trade guilds on a city-by-city basis. For example, the ell or elle was a unit of length commonly used in Europe, but its value varied from 40.2 centimetres in one part of German unit to 70 centimetres in Dutch unit to 94.5 centimetres in English unit#Scottish system. A survey of Switzerland in 1838 revealed that the Foot (unit of length) had 37 different regional variations, the ell had 68, there were 83 different measures for dry grain and 70 for fluids, and 63 different measures for "dead weights".When Isaac Newton wrote Philosophiae Naturalis Principia Mathematica in 1687, he quoted his measurements in Parisian feet so readers could understand the size. Examples of efforts to have local intercity or national standards for measurements, include the Scottish law of 1641, and the British standard Imperial unit system of 1845, which is still commonly used in the UK. At one time Imperial China had successfully standardised units for volume throughout its territory but by 1936 official investigations uncovered 53 dimensions for the chi varying from 200 millimetres to 1250 millimetres; 32 dimensions of the cheng, between 500 millilitres and 8 litres; and 36 different tsin ranging from 300 grams to 2500 grams.Witold Kula, "Measures and Men", Chapter 24:"For all peoples; for all time" However, revolutionary France was to produce the definitive International System of Units which has come to be used by most of the world today.

The desire for a single international system of measurement derives from growing international trade and the need to apply common International standard to goods. For a company to buy a product produced in another country, they need ensure that the product will arrive as described. The medieval ell was abandoned in part because its value could not be standardised. It can be argued that the primary advantage of the International System of Units is simply that it is international, and the pressure on countries to conform to it grew as it became increasingly an international standard. SI is not the only example of international standardisation; several powerful international standardisation organisations exist for various industries, such as the International Organisation for Standardisation, the International Electrotechnical Commission, and the International Telecommunication Union.

International System of Units (SI) See main article: International System of Units Scientists, chiefly in France, had been advocating and discussing a decimal system of measurement based on natural units at least since 1640, but the first official adoption of such a system was after the French Revolution of 1789. The creators of the metric system tried to choose units that were non-arbitrary and practical. The original system started with the metre as the unit of distance, the gram as the unit of mass, and the second as the unit of time. Derived units are made from logical combinations of base units. For example, the speed of an object is defined by the number of metres it moves every second — m/s.

An object that is acceleration has a changing speed, so its m/s value changes per second, thus the unit is m/s². The force exerted on an object can be described by its mass times the resulting acceleration of the object—kg·m/s²—also known as the newton (symbol N). Further base units dealing with electricity, light, and quantities of atoms were added later as these sciences became better understood.

The current version of this system was agreed upon in 1971 and is organised and maintained by the International Bureau of Weights and Measures (abbreviated BIPM, based on the French version of the name). To avoid confusion over the precise value of base units, this organisation also defines a precise recipe on how to recreate the unit, which is decided by the General Conference on Weights and Measures held every four years. While this is the preferred definition for base units, the kilogram is currently defined based on an artifact, an international prototype which is a small object of platinum-iridium dubbed "Le Grand Kilo" maintained by the BIPM.Along with the French Republican Calendar there was an attempt to replace the old (and still currently used) hours, minutes, seconds, and weeks by metric time: a decimal time system with 100 seconds in a minute, 100 minutes in an hour, 10 hours in a day, and 10 days in a week. Since this would have resulted in a day of 100,000 seconds, as opposed to the standard 86,400 seconds, adopting the system would have redefined the second as 0.864 standard seconds. The proposed system was opposed by the Church and dropped on 1 January 1806 in "a political move by Napoleon Bonaparte who decided that it was better to have the Church on his side."O'Connor, J. J. & Robertson, E. F. (2005). "Decimal time and angles".MacTutor History of Mathematics archive. Fife, Scotland: St. Andrews University. Retrieved from http://www-history.mcs.st-andrews.ac.uk/HistTopics/Decimal_time.html on 2006-08-01. The Chinese calendar also had an option for a decimal day system, Ke (unit), up until the 17th century.

Conversion process There are three common routes that nations take in converting from traditional measurement systems to the metric system. The first is a quick, so called "Big-Bang" route which was used by Australia and India in the 1960s and several other developing nations since then. The second route is to phase-in units over time, and progressively outlaw traditional units. This method, favoured by industrialisation nations, is slower and generally less successful. The final route is to redefine traditional units in metric terms. This method has been used successfully where traditional units were ill-defined and had regional variations.

The first route, "Big-Bang", is to simultaneously outlaw the use of history of measurement measurement, metricise, reissue all government publications and laws, and change education systems to metric. India's changeover lasted from 1 April 1960, when metric measurements became legal, to 1 April 1962, when all other systems were banned. The Indian model was extremely successful and was copied over much of the developing world.

The second possibility, and first phase-in route, is to pass a law permitting the use of metric units in parallel with traditional ones, followed by education of metric units, then progressively banning the use of the older measures. This has generally been a slow route to metric. The British Empire permitted the use of metric measures in 1873, but the changeover was not completed in most countries until the 1970s and 1980s when governments took an active role in the now-independent parts of the empire. Japan, too, followed this route and did not complete the changeover for 70 years. In the United Kingdom, the process is still incomplete. By law, loose goods sold with reference to units of quantity have to be weighed and sold using the metric system and, according to current British law, after 31 December 2009 the use of non-metric measures on labelling will be banned. (see Metrication in the United Kingdom for details)

A final possibility is to redefine traditional units in terms of metric values. These redefined "quasi-metric" units often stay in use long after metrication is said to have been completed. China followed this route, and thus while scientists in China know and use the kilogram, common people retain the jin (catty), which now has a value of 500 g. In the Netherlands, 500 g is informally referred to as a pond (Pound (mass)) and 100 g as an ons (ounce), and in Germany and France 500 g is informally referred to respectively as ein Pfund and une livre Confiture de rhubarbe, "1 zeste de citron par livre (500g) de rhubarbe", . In Denmark, the re-defined pund (500 g) is occasionally used, particularly among older people and (older) fruit growers, since these were originally paid according to the number of pounds of fruit produced. In Sweden and Norway a mil (mile) is informally equal to 10 km, and this has continued to be the predominantly used unit in conversation when referring to geographical distances. In the 19th century Switzerland had a non-metric system completely based on metric terms, e. g. 1 Fuss (foot) equal to 0.30 m = 10 Zoll (inches) equal to 0.03 m = 10 Linien (lines) equal to 0.003 m.

It is difficult to judge the degree to which ordinary people change to using metric in their daily lives. In countries that have recently changed, demographics tend to still use an older and more familiar system. Also, local variations abound in what exactly becomes metricated and what does not. In Canada, for example, ovens and cooking temperatures are usually measured in degrees Fahrenheit, and Canadians almost invariably use Fahrenheit for cooking; though this is not necessarily by choice but may instead be due to the overwhelming influence of the neighbouring and largely non-metricated United States. In the United Kingdom, which is still in the process of changing over completely, Fahrenheit is almost never encountered (except when some people talk about hot summer weather) while other metric units are often used in conjunction with older measurements, and road signs use miles rather than kilometres. Such countries could be said to be "semi-metric".

Adoption

The metric system, developed in France around the turn of the 19th century, was quickly taken up by Europe's scientists before spreading to traders and industrialists and finally to the common people. France's neighbour, the Kingdom of the Netherlands (present The Netherlands, Belgium, and Luxembourg), Mexico and Brazil changed in 1820. Spain and its remaining American colonies changed in the 1850s and 1860s. Italy and Germany went metric after their respective unifications in 1861 and 1871, followed shortly by Portugal, Norway, Sweden, Austria-Hungary and Finland. By 1900, 39 countries in Europe and Latin America were using the metric system.

The first Asian nations to convert were Mongolia (1918), Cambodia and Afghanistan (in the 1920s). Japan began its slow conversion process in 1891 when it received a copy of the metre standard from the Institute in France. In 1924, the government decided to replace fully the traditional Japanese unit system within ten years; however, public opposition delayed implementation. The U.S. occupation of the late 1940s briefly caused a de facto conversion to U.S. customary units. Metrication was completed in Japan by 1969, although some of the old units are still in informal use.

India's conversion was far quicker, paradoxically helped by low popular literacy and the fact that there was previously no nationwide standard measurement system—British Imperial units were used by the upper class, while various regional systems were used by the poor. From 1956 to 1961, India both changed to metric units and decimalised its currency.

Hong Kong officially adopted the system under the 1976 Metrication Ordinance. However, many of the wet markets and traditional Chinese medicine shops still use the Chinese units of measurement.

China began conversion in the 1920s, but the process was not completed until Communist times. China also decimalised its native measurement units and redefined them as even amounts of metric units. Thus Chinese units was redefined to equal 500 grams. The Soviet Union changed from Obsolete Russian weights and measures to metric in 1924. and Northern Ireland, where the imperial system still used).Those Arab nations that were colonization by France adopted the system early: Algeria changed in 1840, Tunisia in 1890, and this extended to the other Arab countries after the conquest of the Ottoman Empire in 1918. Jordan, which had been a British League of Nations Mandate, was the last Arab nation to convert, in the 1950s. The German colonies of Rwanda and Burundi and the Belgian Congo (now Democratic Republic of the Congo) were the first sub-Saharan African states to go metric in 1910. French territories in Africa were de facto metric while under French rule and kept the metric weights and measures laws when they became independent in the 1950s and 1960s. The last African states to go metric were the former British colonies of southern and eastern Africa.

Britain and its former colonies (with the notable exception of the United States) began their conversion process in the later part of the 20th century. South Africa began a ten-year process of metrication in 1967 with the creation of Metrication Advisory Board, a Metrication Department and a South African Bureau of Standards. Metrication in Australia began work in 1969 with a publicity campaign involving lecture tours, theatrical advertisements and the free distribution of metric-sized items, including calendars, rulers and A4-sized leaflets. Public opposition was on points of detail only, and the process was declared completed in 1977. Metrication in Canada and New Zealand followed similar plans in the 1970s. Ireland completed a very gradual changeover process on 20 January 2005 with the conversion of road speed limits to km/h. Ireland began metrication in 1970 when schools switched to teaching the metric system only.

In January 2007, NASA announced their plan to use metric units for all operations on the moon for their planned Lunar outpost (NASA), partly in order to improve international cooperation.

Exceptions As of 2007, the metric system dominates all but three countries — Myanmar, Liberia, and the United States — but traditional units are still used in many places and industries. For example, automobile Tire-pressure gauge is measured as Pound-force per square inch in countries such as Brazil and Argentina which are otherwise completely metric. Office space is often rented in traditional units, such as square foot in Hong Kong, tsubo in Japan or pyoung in Korea (use of these units is to be subject to a fine in South Korea beginning July 2007 Use of Traditional Measuring Units to Be Fined — Korea Times, 10-22-2006 20:06). Traditional measurements are still used in some areas, e.g. in plumbing the diameters of pipes are still measured in inches in some countries (though not in the UK where all new pipes are metric). Automotive wheel diameters are still set as whole inch measurements (though tire widths are measured in millimetres) and dots per inch continues to be used in describing graphical resolution in the computer industry. Television and monitor screen diameters and bicycle frame sizes are still commonly cited in inches in many countries, however in Australia, centimetres are often used for CRT televisions, whilst CRT computer monitors and all LCD monitors are measured in inches. The only exception to the metrication process in Ireland was the pint in bars, pubs and clubs; though alcohol sold in any other location is in metric units (usually 333 ml (bottled beer), 500 ml (canned beer), 750 ml (wine) or 1 l (spirit)). In Australia, a pint of beer was redefined to 570ml (see Australian_beer#Beer glasses).



In some countries (like Antigua, see above), the transition is still in progress. The Caribbean island nation of Saint Lucia announced metrication programs in 2005 to be compatible with CARICOM.Caribbean Net News, (17 March 2005). St Lucia moving to metric system. Retrieved 27 August 2006. In the United Kingdom, the metric system is compulsory in most, but not all, industries. In that country, the metric system had been legal for nearly a century before Metrication in the UK began in earnest. The government had been making preparations for the conversion of the Imperial unit since the 1862 Select Committee on Weights and Measures recommended the conversionDepartment of Trade and Industry, United Kingdom (15 July 1862). Report (1862) from the Select Committee on Weights and Measures. and the Weights and Measures Act of 1864 and the Weights and Measures (Metric System) Act of 1896 legalised the metric system. Metric Timeline. UK metric association. Retrieved on 27 August 2006. In 1965, with lobbying from British industries and the prospects of joining the European Community, the government set a 10 year target for full conversion and created the Metrication Board in 1969. Metrication did occur in many areas during this time period, including the re-surveying of Ordnance Survey maps in 1970, decimalisation of the Pound sterling in 1971, and the teaching the metric system in schools. However, no date was set for making the use of the metric system compulsory and the Metrication Board was abolished in 1980 following a change in government.Humble, Jim. Historical perspectives by the last Director of the UK Metrication Board. UK metric association. Retrieved on 27 August 2006. The 1989 European Units of Measurement Directive (89/617/EEC) required all member states to make the metric compulsory, however, the British negotiated certain derogations (delayed switchovers), including miles for road signs, and pints for draught beer, cider, and milk sales.United Kingdom (1995). The Units of Measurement Regulations 1995. Statutory Instrument 1995 No. 1804. ISBN 0-11-053334-8. (see Section 5(2) for exceptions.) Advocacy groups such as the Metric Martyrs, the British Weights and Measures Association, and the Active Resistance to Metrication continue to resist the compulsory use of the metric system, on the grounds that some surveys have shown that a lot of British people do not think in metric termsBritish Weights and Measures Association. Consumer Affairs Retrieved on 27 August 2006. and because physical repackaging into rounded metric numbers could lead to reducing the quantity of goods sold for the same price.British Weights and Measures Association. The Great Metric Rip-Off Retrieved on 27 August 2006. It should, however, be noted that some items have been rounded up during metric changeover, for example spirits were changed from of a Gill (unit) (23.7 ml) to 25 ml and the standard loaf from 14 ounces (396.9 g) to 400 g.

Non-metric countries Liberia, Myanmar (Burma), and the United States are the three countries that have yet to adopt the metric system.The World Factbook. (2006). Washington: Central Intelligence Agency. Appendix G. Retrieved 2006-08-08 from https://www.cia.gov/library/publications/the-world-factbook/appendix/appendix-g.html.U.S. Metric Association. Metric usage and metrication in other countries. Retrieved on 27 August 2006. In the United States its use was made legal as a system of measurement in 1866U.S. Metric Association. Metric Act (Kasson Act) of 1866. Retrieved on 27 August 2006. and the United States was a founding member of the International Bureau of Weights and Measures in 1875.U.S. Metric Association. Metric Convention of 1875. Retrieved on 27 August 2006. The system was officially adopted by the federal government in 1975 for use in the military and government agencies.U.S. Metric Association. Metric Conversion Act of 1975. Retrieved on 27 August 2006. In 1985, the metric system was made the preferred (but predominantly voluntary) system of weights and measures for United States trade and commerce (see Metrication in the United States). It has remained voluntary for federal and state road signage to use metric units, despite attempts in the 1990s to make it a requirement.U.S. Metric Association. National Highway System Designation Act of 1995. Retrieved on 27 August 2006. A 1992 amendment to the Fair Packaging and Labeling Act, which took effect in 1994, required labels on "consumer commodities"U.S. Metric Association. Sec. 1459. Definitions Fair Packaging and Labeling Act. Retrieved on 27 August 2006. to include both SI and U.S. customary units. Likewise, Canada also legally allows for dual labeling of goods provided that the metric unit is listed first and that there is a distinction of whether a liquid measure is a U.S. or a Canadian (Imperial) unit. Most states have passed laws permitting metric-only labels.Metric Methods, The rapid progress of adoption of permissible metric-only labeling at the state level. Retrieved on 27 August 2006. Regardless, the American public and much of the private business and industry use U.S. customary units.Zengerle, Jason (January/February 1999). Waits and Measures. Mother Jones. At least two states, Kentucky and California, have even moved towards demetrication of highway construction projects.Commonwealth of Kentucky (1998). Metric to English Conversion.State of California, Department of Transportation (2004). Metric to U.S. Customary Units (English) Transition.

Air and sea transport Some industries have resisted metrication. Non-metric measures in air and sea transport retain worldwide dominance. In these areas the nautical mile is still widespread. This may be because various historical versions of the nautical mile were originally designed to represent a minute of arc of on the surface of the Earth at certain points (the definition in use today is standardised as 1852 metres exactly). While the metre was also based on the Earth with 100 km equal to an arc of 1 grad (angle), those units of angle have not seen widespread use, though they do appear on some maps.

The prime unit of speed for maritime and air navigation remains the knot (nautical) (nautical mile per hour). But before the 1960s, miles per hour (which bears no relationship to the Earth) was most often used for this purpose, and remained in fairly common use for some purposes in the 1970s and later.

The prime unit of measure for aviation (altitude) is usually estimated based on air pressure values and described in nominal feet rather than nominal metres. However, several countries and and air forces (mostly former countries of the Warsaw Pact) use metres for altitude today. Thus, an individual pilot can sometimes operate with altitudes in metres and sometimes in feet. The policies of the International Civil Aviation Organization (ICAO) relating to measurement are:



Consistent with ICAO policy, aviation has undergone a lot of metrication over the years. For example, the United Kingdom and Ireland metricated runway length and many other measures several decades ago. The United States metricated temperature reports in 1996 and the US military has metricated some reports of visual range. Metrication is also gradually taking place in cargo weights/dimensions and fuel volume/weight.

Accidents and incidents Confusion over units during the process of metrication can sometimes lead to accidents. One of the most famous examples is the Gimli Glider, a Boeing 767 that ran out of fuel in Canada in 1983 due, in large part, to confusion at Air Canada during Canada's metrication.Merran Williams, (July-August 2003), "The 156-tonne GIMLI GLIDER", in Flight Safety Australia, p. 22, 25, available at http://www.casa.gov.au/fsa/2003/jul/22-27.pdf

While not strictly an example of national metrication, the use of two different systems was a contributing factor in the loss of the Mars Climate Orbiter in 1998. NASA specified metric units in the contract. NASA and other organisations worked in metric units but one subcontractor, Lockheed Martin, provided thruster performance data to the team in pound force seconds instead of newton seconds. The spacecraft was intended to orbit Mars (planet) at about 150 km altitude but the incorrect data meant that it descended to about 57 km and probably burned up in the Martian atmosphere.

Opposition Interestingly, considering it was the birthplace of the metric system, France experienced a particularly rough journey to metrication. The traditional French measuring system was chaotic, with size of units differing in each small town, and often even within towns. Lyon had two different values of pound in general use, one of 14 ounces, and another of 15 ounces, the latter only being used for measuring silk. The revolutionary government, which saw the newly conceived metric system (commissioned by the previous king) as a good fit for its ideology of "pure reason", first attempted a quick conversion, legalising metric units in 1795 and, just four years later, banning the use of traditional units. Massive popular opposition led Napoleon, after he came to power, to roll back these reforms. He publicly denounced the previous government for "tormenting people with trifles". It appears that it was decimalisation that disturbed the people most — as, although Napoleon decreed that there should be "such fractions and multiples as were generally used", he redefined the old base units in metric terms. The original metric system was made law again in France in 1837.

Japan also saw popular resistance to its 1920s metrication program, where opponents of the metric system believed that the adoption of a foreign measuring system would have a bad influence on national sentiment, cause dislocations in public life and needless expense to the nation, prove disadvantageous to foreign trade, and hurt the national language and culture. In 1933, the government postponed the date of the first stage of conversion by five years, and the date of the second stage by ten years. The Occupied Japan resulted in a temporary conversion to U.S. customary units. The Post-Occupation Japan required an international standard measurement system and the issue was pursued again in the 1950s and 1960s. The process was not completed until 1969. Traditional units are, however, still used for measurements of sake and the area of land and apartments. Nevertheless, local units had been defined in terms of metric units (e.g., 1 shaku = 10/33 metre) as early as 1891. For the measurement of sake, 10 Japanese cups (180 millilitres each) equal 1 shoh (traditional flask size of 1.8 litre capacity). Rice cookers are typically sold as having capacities such as 5 cups or 10 cups. (Note that the traditional Japanese cup is 180 millilitres while the American cup is 237 millilitres.Conversion for US cup can be found in NIST (1995) Guide to SI Units Appendix B8 )

Overall, few countries have experienced much popular opposition to metrication. Some, such as 19th century European countries, Russia, India and China, converted before most of their populations were literate, so the initial conversion affected few people. For others, such as Ireland, the previous system (ie. imperial) was seen as foreign.

See also

Notes

External links

Websites supporting metrication:

Books supporting metrication:

Websites opposing metrication:

Books opposing metrication:



Metrication - Wikipedia, the free encyclopedia
Metrication (or metrification) refers to the introduction of the SI metric system as the international standard for physical measurements—a long-term series of independent and ...

Metrication in the United States - Wikipedia, the free encyclopedia
Metrication in the United States has been unsteady. In some fields, the metric system has been used in the United States since the early 1800s. The use of metric units in lieu of ...

The Metric System and Metric Conversion Calculator Download
Metrication is the process of converting to the metric system. The Metrication.com website has been designed to quickly and easily provide you with the information that you require ...

The Weights and Measures Act 1985 (Metrication) (Amendment) Order ...
Statutory Instrument 1994 No. 2866. The Weights and Measures Act 1985 (Metrication) (Amendment) Order 1994

Metrication - Continuing Use of Imperial Units of Measurement
Metrication - Continuing Use of Imperial Units of Measurement The European Commission today (11 September 2007) announced its proposal to indefinitely extend the use of ...

Metrication : Ashley Mote MEP
Stop Press. So What Is Tory Policy on the EU? EU Costs Every Briton £1500 A Year; Taxpayers Fund EU Squabble over Taxpayers’ Funds; European Parliament’s Power to Hold ...

BWMA/Guide to Metrication Concordat
BWMA exists to protect and promote customary UK/imperial weights and measures, and to oppose compulsory conversion to the metric system.

English weights and measures: Anti-metrication
English weights & measures: Anti-metrication ... Anti-metrication Metrication - the wilful destruction of culture Last edited:

Graig Farm Organics - What We Offer > How to Buy Graig Farm Produce ...
Metrication ... This page is designed as an aid to converting prices and weights between metric and ...

UK metric association
Worse still, metrication has become politicised. In the 1960s and 1970s there was a broad cross-party political consensus in favour of metric units; metric was ...

 

Metrication



 
Copyright © 2008 Hintcenter.com - All rights reserved.
Home | Terms of Use | Privacy Policy
All Trademarks belong to their repective owners. Many aspects of this page are used under
commercial commons license from Yahoo!